Flange facings must be in accordance with the applicable standards listed in table 2 to § 56.60-1 and MSS SP-6 (incorporated by reference; see § 56.01-2). [CGFR 68-82, 33 FR 18843, Dec. 18, 1968, as amended by CGD 77-140, 54 FR 40605, Oct. 2, 1989; USCG-2003-16630, 73 FR 65176, Oct. 31, 2008]
TL;DR
Flange facings must be in accordance with the applicable standards listed in table 2 to § 56.60-1 and MSS SP-6 (incorporated by reference; see § 56.01-2).
Section 56.25-10 — full text
Rendered cleanly from the source — the exact regulatory text, with subsection structure preserved.
From regulation to exam
See how this section shows up on the test
Test your knowledge
Try 5 real exam questions on the rules behind this regulation — no sign-up needed.
Was this page helpful?