The selection and limitation of piping joints must be as required by this subpart rather than as required by 110 through 118 of ASME B31.1 (incorporated by reference; see § 56.01-2); however, certain requirements are marked “reproduced” in this subpart. [USCG-2003-16630, 73 FR 65177, Oct. 31, 2008]
TL;DR
The selection and limitation of piping joints must be as required by this subpart rather than as required by 110 through 118 of ASME B31.1 (incorporated by reference; see § 56.01-2); however, certain requirements are marked “reproduced” in this subpart.
Section 56.30-1 — full text
Rendered cleanly from the source — the exact regulatory text, with subsection structure preserved.
From regulation to exam
See how this section shows up on the test
Test your knowledge
Try 5 real exam questions on the rules behind this regulation — no sign-up needed.
Was this page helpful?